Nonlinear response estimates of RC frames using linear analysis of SDOF systems          下载免费PDF全文

Saman Yaghmaei‐Sabegh  Shabnam Neekmanesh  Elisa Lumantarna 《地震工程与结构动力学》2014,43(5):769-790

An approximate‐simple method for nonlinear response estimates of reinforced concrete frames subjected to near‐field and far‐field records is presented in this paper. The approximate method is based on equivalent single‐degree‐of‐freedom and linear multi‐degree‐of‐freedom models. In this procedure, the nonlinear maximum roof displacement is estimated using an effective period factor and elastic response spectrum with an equivalent damping. The effective period factor was proposed for far‐field and near‐field ground motion records. For regions of high seismicity, the maximum roof displacement can be estimated by applying an effective period factor of 2.3 and 2.1 for near‐field and far‐field records, respectively, and 9% damped displacement response spectrum. For regions of moderate seismicity, a lower effective period factor of 1.9 and 1.8, for near‐field and far‐field records, respectively, can be applied to estimate the maximum roof displacement. A relationship between linear and nonlinear response of multi‐degree‐of‐freedom systems was also proposed to obtain estimates of the maximum inter‐story drift of nonlinear responding reinforced concrete frames. In addition, the effects of number of ground motion records used in the analyses on the scatters of results were investigated. The required number of ground motions to produce a reliable response was proposed. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Sensitivity of interfacial hydraulics to the microtopographic roughness of water‐lain gravels          下载免费PDF全文

Stephen P. Rice  Thomas Buffin‐Bélanger  Ian Reid 《地球表面变化过程与地形》2014,39(2):184-199

Flow within the interfacial layer of gravel‐bed rivers is poorly understood, but this zone is important because the hydraulics here transport sediment, generate flow structures and interact with benthic organisms. We hypothesized that different gravel‐bed microtopographies generate measurable differences in hydraulic characteristics within the interfacial layer. This was tested using a high density of spatially and vertically distributed, velocity time series measured in the interfacial layers above three surfaces of contrasting microtopography. These surfaces had natural water‐worked textures, captured in the field using a casting procedure. Analysis was repeated for three discharges, with Reynolds numbers between 165000 and 287000, to evaluate whether discharge affected the impact of microtopography on interfacial flows. Relative submergence varied over a small range (3.5 to 8.1) characteristic of upland gravel‐bed rivers. Between‐surface differences in the median and variance of several time‐averaged and turbulent flow parameters were tested using non‐parametric statistics. Across all discharges, microtopographic differences did not affect spatially averaged (median) values of streamwise velocity, but were associated with significant differences in its spatial variance, and did affect spatially averaged (median) turbulent kinetic energy. Sweep and ejection events dominated the interfacial region above all surfaces at all flows, but there was a microtopographic effect, with Q2 and Q4 events less dominant and structures less persistent above the surface with the widest relief distribution, especially at the highest Reynolds number flow. Results are broadly consistent with earlier work, although this analysis is unique because of the focus on interfacial hydraulics, spatially averaged ‘patch scale’ metrics and a statistical approach to data analysis. An important implication is that observable differences in microtopography do not necessarily produce differences in interfacial hydraulics. An important observation is that appropriate roughness parameterizations for gravel‐bed rivers remain elusive, partly because the relative contributions to flow resistance of different aspects of bed microtopography are poorly constrained. © 2014 The Authors. Earth Surface Processes and Landforms Published by John Wiley & Sons Ltd.  相似文献   

Statistical models for shear strength of RC beam‐column joints using machine‐learning techniques          下载免费PDF全文

Jong‐Su Jeon  Abdollah Shafieezadeh  Reginald DesRoches 《地震工程与结构动力学》2014,43(14):2075-2095

This paper proposes a new set of probabilistic joint shear strength models using the conventional multiple linear regression method, and advanced machine‐learning methods of multivariate adaptive regression splines (MARS) and symbolic regression (SR). In order to achieve high‐fidelity regression models with reduced model errors and bias, this study constructs extensive experimental databases for reinforced and unreinforced concrete joints by collecting existing beam‐column joint subassemblage tests from multiple sources. Various influential parameters that affect joint shear strength such as material properties, design parameters, and joint configuration are investigated through tests of statistical significance. After performing a set of regression analyses, the comparison of simulation results indicates that MARS approach is the best estimation method. Moreover, the accuracy of analytical predictions of the derived MARS model is compared with that of existing joint shear strength relationships. The comparison results show that the proposed model is more accurate compared to existing relationships. This joint shear strength prediction model can be readily implemented into joint response models for evaluation of earthquake performance and inelastic responses of building frames. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Seismic design and testing of the bottom vertical boundary elements in steel plate shear walls. Part 1: design methodology          下载免费PDF全文

Keh‐Chyuan Tsai  Chao‐Hsien Li  Hung‐Chi Lee 《地震工程与结构动力学》2014,43(15):2237-2259

This research investigates the seismic design method and the cyclic inelastic behavior of the bottom column, also called the vertical boundary element (VBE), in steel plate shear walls (SPSWs). This study consists of two parts. This Part 1 paper discusses the anticipated pushover responses for properly designed SPSWs and the possible inelastic responses of the bottom VBE at various levels of inter‐story drift. Considering both the tension field action of the infill panel and the sway action of the boundary frame, this study develops a simplified method to compute the flexural and shear demands in the bottom VBE. Based on the superposition method, this approach considers various plastic hinge forming locations at different levels of inter‐story drift. One of the key performance‐based design objectives is to ensure that the top ends of the bottom VBEs remain elastic when the SPSWs are subjected to the maximum considered earthquake. This paper presents the comprehensive design procedures for the bottom VBE. Furthermore, this study conducted cyclic performance evaluation tests of three full‐scale two‐story SPSWs at the Taiwan National Center for Research on Earthquake Engineering in 2011 to validate the effectiveness of the proposed design methods. The experimental program, cyclic inelastic responses of the SPSWs and bottom VBEs, and numerical simulations are presented in Part 2. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Understanding river dune splitting through flume experiments and analysis of a dune evolution model          下载免费PDF全文

Jord J. Warmink  C. Marjolein Dohmen‐Janssen  Joost Lansink  Suleyman Naqshband  Olav J. M. van Duin  Andries J. Paarlberg  Paul Termes  Suzanne J. M. H. Hulscher 《地球表面变化过程与地形》2014,39(9):1208-1220

Forecasts of water level during river floods require accurate predictions of the evolution of river dune dimensions, because the hydraulic roughness of the main channel is largely determined by the bed morphology. River dune dimensions are controlled by processes like merging and splitting of dunes. Particularly the process of dune splitting is still poorly understood and – as a result – not yet included in operational dune evolution models. In the current paper, the process of dune splitting is investigated by carrying out laboratory experiments and by means of a sensitivity analysis using a numerical dune evolution model. In the numerical model, we introduced superimposed TRIAS ripples (i.e. triangular asymmetric stoss side‐ripples) on the stoss sides of underlying dunes as soon as these stoss sides exceed a certain critical length. Simulations with the model including dune splitting showed that predictions of equilibrium dune characteristics were significantly improved compared to the model without dune splitting. As dune splitting is implemented in a parameterized way, the computational cost remains low which means that dune evolution can be calculated on the timescale of a flood wave. Subsequently, we used this model to study the mechanism of dune splitting. Literature showed that the initiation of a strong flow separation zone behind a superimposed bedform is one of the main mechanisms behind dune splitting. The flume experiments indicated that besides its height also the lee side slope of the superimposed bedform is an important factor to determine the strength of the flow separation zone and therefore is an important aspect in dune splitting. The sensitivity analysis of the dune evolution model showed that a minimum stoss side length was required to develop a strong flow separation zone. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Geophysical constraints on deep weathering and water storage potential in the Southern Sierra Critical Zone Observatory   总被引：1，自引：0，他引：1       下载免费PDF全文

W. Steven Holbrook  Clifford S. Riebe  Mehrez Elwaseif  Jorden L. Hayes  Kyle Basler‐Reeder  Dennis L. Harry  Armen Malazian  Anthony Dosseto  Peter C. Hartsough  Jan W. Hopmans 《地球表面变化过程与地形》2014,39(3):366-380

The conversion of bedrock to regolith marks the inception of critical zone processes, but the factors that regulate it remain poorly understood. Although the thickness and degree of weathering of regolith are widely thought to be important regulators of the development of regolith and its water‐storage potential, the functional relationships between regolith properties and the processes that generate it remain poorly documented. This is due in part to the fact that regolith is difficult to characterize by direct observations over the broad scales needed for process‐based understanding of the critical zone. Here we use seismic refraction and resistivity imaging techniques to estimate variations in regolith thickness and porosity across a forested slope and swampy meadow in the Southern Sierra Critical Zone Observatory (SSCZO). Inferred seismic velocities and electrical resistivities image a weathering zone ranging in thickness from 10 to 35 m (average = 23 m) along one intensively studied transect. The inferred weathering zone consists of roughly equal thicknesses of saprolite (P‐velocity < 2 km s^?1) and moderately weathered bedrock (P‐velocity = 2–4 km s^?1). A minimum‐porosity model assuming dry pore space shows porosities as high as 50% near the surface, decreasing to near zero at the base of weathered rock. Physical properties of saprolite samples from hand augering and push cores are consistent with our rock physics model when variations in pore saturation are taken into account. Our results indicate that saprolite is a crucial reservoir of water, potentially storing an average of 3 m³ m^?2 of water along a forested slope in the headwaters of the SSCZO. When coupled with published erosion rates from cosmogenic nuclides, our geophysical estimates of weathering zone thickness imply regolith residence times on the order of 10⁵ years. Thus, soils at the surface today may integrate weathering over glacial–interglacial fluctuations in climate. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Paleoflood events recorded by speleothems in caves          下载免费PDF全文

Fernando Gázquez  José María Calaforra  Paolo Forti  Heather Stoll  Bassam Ghaleb  Antonio Delgado‐Huertas 《地球表面变化过程与地形》2014,39(10):1345-1353

Speleothems are usually composed of thin layers of calcite (or aragonite). However, cemented detrital materials interlayered between laminae of speleothemic carbonate have been also observed in many caves. Flowstones comprising discontinuous carbonate layers form due to flowing water films, while flood events introduce fluviokarstic sediments in caves that, on occasion, are recorded as clayey layers inside flowstones and stalagmites. This record provides a potential means of understanding the frequency of palaeofloods using cave records. In this work, we investigate the origin of this type of detrital deposit in El Soplao Cave (Northern Spain). The age of the lowest aragonite layer of a flowstone reveals that the earliest flood period occurred before 500 ka, though most of the flowstone formed between 422 +69/‐43 ka and 400 +66/‐42 ka. This suggests that the cave was periodically affected by palaeoflood events that introduced detrital sediments from the surface as a result of occasional extreme rainfall events, especially at around 400 ka. The mineralogical data enable an evolutionary model for this flowstone to be generated based on the alternation of flood events with laminar flows and carbonate layers precipitation that can be extrapolated to other caves in which detrital sediments inside speleothems have been found. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Fire severity and surface rock fragments cause patchy distribution of soil water repellency and infiltration rates after burning   总被引：3，自引：0，他引：3       下载免费PDF全文

Ángel J. Gordillo‐Rivero  Jorge García‐Moreno  Antonio Jordán  Lorena M. Zavala  Fernando M. Granja‐Martins 《水文研究》2014,28(24):5832-5843

Although fire‐induced soil water repellency (SWR) and its effects on soil hydrology and geomorphology have been studied in detail, very few studies have considered the effect of rock fragments resting on the soil surface or partly embedded in soil. In this research, we have studied the effect of rock fragments on the strength and spatial distribution of fire‐induced SWR at different fire severities. A fire‐affected area was selected for this experiment and classified into different zones according to fire severity (unburned, low, moderate and high) and rock fragment cover (low, <20% and high, >60%). During 7 days after fire, SWR and infiltration rates were assessed in the soil surface covered by individual rock fragments and in the midpoint between two adjacent rock fragments (with maximum spacing of 20 cm). SWR increased with fire severity. Rock fragments resting on the soil surface increased the heterogeneity of the spatial distribution of fire‐induced SWR. SWR increased significantly with rock fragment cover in bare areas under moderate and high fire severity, but quantitatively important changes were only observed under high fire severity. In areas with a low rock fragment cover, water repellency from soil surfaces covered by rock fragments increased relative to bare soil surfaces, with increasing SWR. In areas with a high rock fragment cover, SWR increased significantly from non‐covered to covered soil surfaces only after low‐severity burning. Rock fragment cover did not affect infiltration rates, although it decreased significantly in soil surfaces after high‐severity burning in areas under low and high rock fragment cover. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

How hydrological factors initiate instability in a model sandy slope   总被引：1，自引：1，他引：0       下载免费PDF全文

Tomomi Terajima  Ei‐ichiro Miyahira  Hiroyuki Miyajima  Hirotaka Ochiai  Katsumi Hattori 《水文研究》2014,28(23):5711-5724

Knowledge of the mechanisms of rain‐induced shallow landslides can improve the prediction of their occurrence and mitigate subsequent sediment disasters. Here, we examine an artificial slope's subsurface hydrology and propose a new slope stability analysis that includes seepage force and the down‐slope transfer of excess shear forces. We measured pore water pressure and volumetric water content immediately prior to a shallow landslide on an artificial sandy slope of 32°: The direction of the subsurface flow shifted from downward to parallel to the slope in the deepest part of the landslide mass, and this shift coincided with the start of soil displacement. A slope stability analysis that was restricted to individual segments of the landslide mass could not explain the initiation of the landslide; however, inclusion of the transfer of excess shear forces from up‐slope to down‐slope segments improved drastically the predictability. The improved stability analysis revealed that an unstable zone expanded down‐slope with an increase in soil water content, showing that the down‐slope soil initially supported the unstable up‐slope soil; destabilization of this down‐slope soil was the eventual trigger of total slope collapse. Initially, the effect of apparent soil cohesion was the most important factor promoting slope stability, but seepage force became the most important factor promoting slope instability closer to the landslide occurrence. These findings indicate that seepage forces, controlled by changes in direction and magnitude of saturated and unsaturated subsurface flows, may be the main cause of shallow landslides in sandy slopes. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Assessment of evaporation and water fluxes in a column of dry saline soil subject to different water table levels   总被引：1，自引：0，他引：1       下载免费PDF全文

María Fernanda Hernández‐López  Jorge Gironás  Isabelle Braud  Francisco Suárez  José Francisco Muñoz 《水文研究》2014,28(10):3655-3669

Dry saline soils are common in the arid and hyper‐arid basins located in the Chilean Altiplano, where evaporation from shallow groundwater is typically the major component of the water balance. Thus, a good understanding of evaporation processes is necessary for improving water resource planning and management in these regions. In this study, we conducted laboratory experiments with a natural saline soil column to estimate evaporation rates and assess the liquid and water vapor fluxes under different water table levels. Water content, electrical conductivity and temperature at different depths were utilized to assess the liquid and water vapor fluxes in the soil column. We observed movement of water that dissolves salts from the soil and transports them to areas in the column where they accumulate. Isothermal liquid flux was predominant, while thermal and isothermal liquid and thermal water vapor fluxes were negligible, except for deep water table levels where isothermal and thermal water vapor fluxes had similar magnitude but opposite directions. Differences observed in total fluxes for all water table levels were due to different upward and downward fluxes, which depend on changes in water content and temperature within the soil profile. Both the vapor flux magnitude and direction were found to be very sensitive to the choice of empirical parameters used in flux quantification, such as tortuosity and the enhancement factor for local temperature gradients in the air phase within the column. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献